Things To Look For When Buying a Used Car

September 15th, 2016
Buying a used car is somewhat less of a crapshoot than it was at one time. You can get detailed information on a vehicle's history via the CARFAX report, and a Car for saletechnician can use onboard diagnostics to get a good picture of what's going on under the hood and what problems might be coming up. 
 
It's always a good idea to get a mechanic to look over any prospective purchase, but there are things you can get a look at yourself before you spend the money for a professional inspection. These are things which will give you a pretty good idea of the kind of use and maintenance a vehicle has seen before you got it. 
 
-- Put your head against a fender and sight down the side of the vehicle with one eye. Look out for ripples or ...[more]
  Posted in: Auto Repair 101

What's Leaking From My Car?

July 14th, 2016
You go out to your car, start it up, pull out of your parking space and see a puddle of...something...where you were parked a moment ago. This is never a good feeling. What could it be? 
 
Fortunately, some automotive fluids are dyed different colors to make this a little easier to narrow down. 
 
Does it appear to be water? Were you recently running your A/C? Chances are that's just condensation from the A/C system, which drips out through a rubber tube and is perfectly normal. No worries there. 
 
For years, antifreeze was dyed a bright green to make it easy to identify. Today, other antifreeze formulations can be colored pink or orange, but it's still not hard to figure out -- antifreeze has a swe ...[more]
  Posted in: Auto Repair 101

A/C Problems Demystified

June 30th, 2016

Believe it or not, the A/C system in your vehicle is fairly simple in principle and design. Like your refrigerator, it operates on a cycle of compression and expansion of a gas, known as refrigerant. The compressor turns the gas into a liquid, and as the gas evaporates it provides cooling. Like your refrigerator, its main components are: 
 
  • Compressor
  • Condenser 
  • Receiver/dryer
  • Thermostatic expansion valve
  • Evaporator
  • Refrigerant
  • Blower 
The good news is most automotive A/C systems have become very robust and reliable compared to cars from a generation ago. Most of the time, poor performance is due to low refrigerant levels due to lea ...[more]
  Posted in: Auto Repair 101

So You Get A Flat Tire...What Now?

June 16th, 2016

Flat TireNobody ever looks forward to a flat tire, and nobody ever says "well, that was a really good time" after having one. You can at least minimize the damage to your tire and danger to yourself, though.

Flats vs Blowouts

If you get a blowout, you'll know about it right away. Sometimes the tire can fail dramatically, with a bang as loud as a shotgun going off. Other times, it might just be a loss of air and a sudden change in your car's handling, followed by vibration, noise and a pull to one side. If it's a front tire that fails, your car might be a real handful to drive until you can get to a stop.

In either case, your first job is to pull off the road as quickly (but safely!) as you can. Don't jam on the brakes or make any sudden mo ...[more]

  Posted in: Tires 101

Regular, Synthetic or Blend...What Kind of Oil Do I Need?

May 26th, 2016

At one time, there were only a couple of choices for motor oil. Today, that is no longer the case, and hasn't been for quite some time. Here's a quick breakdown of what you need to consider when it's time for an oil change:

  • Viscosity: Viscosity is how thick your oil is, and how it retains its pour properties at various temperatures. In this respect, synthetic oil is far superior. Conventional oils will thicken in cold weather and thin out when very hot, while the viscosity of synthetic is much more uniform. Check your owner's manual -- many newer models require a thinner, lower-viscosity oil, which also helps the engine run more efficiently. Viscosity is expressed as a numerical value -- the lower the number, the thinner the oil. Many are designed to work a ...[more]
  Posted in: Auto Repair 101

Questions You Shouldn’t Be Afraid to Ask Your Auto Repair Tech

March 17th, 2016

Often, drivers are mystified by how their cars actually work. It’s to be expected. Even an older car is a complex machine with many sub-assemblies that all work together to move it down the road.Car questions? Ask them!

As a result, drivers tend to be a little intimidated by auto repair and often tend to not inform themselves by asking the necessary questions of a tech or a garage. Too often, that ends up being a big mistake. Here are some examples of the kinds of things you really should know before any auto repair work starts:

  • Does your shop work on any kind of vehicle? Of course, most shops can service a product from GM, Ford, Chrysler, Nissan, Toyota and the other leading makes. Some makes, however, require a lot more training and experience, o ...[more]
  Posted in: Auto Repair 101